Fridge Water Dispenser Cleaning Made Simple

When you want clean and germ-free water flowing from your cooler, then you need to clean the dispenser regularly. There’s just no way around it. 

It doesn’t have to be hard, though. All you need is to learn some simple yet effective ways to clean your water dispenser, and you’ll always have clean water flowing from it.

Gather Your Cleaning Supplies First

Before you proceed with the task at hand, make sure you have everything you need. A pair of gloves is usually not needed, but if your skin is sensitive, it’s always a good idea to use some.

Here’s what you’ll generally need to clean the dispenser:

White Vinegar

It’s excellent for tackling mineral build-up, and not just for the dispenser, but for other areas in your household. It also wipes out germs due to its acidic properties. Simply mix it with equal parts water, and you have a potent cleaner that’s ideal for your fridge’s water dispenser. 

So, if you’re frequently dealing with stubborn limescale, white vinegar is the way to go. A quick spray, a brief wait, and a wipe is all it takes. It’s like wielding a magic wand in your cleaning arsenal.

Baking Soda

Sodium bicarbonate is best for when you have to scrub, as it lifts away the dirt without leaving a scratch. Moreover, it’s absorbent, so this means goodbye to any foul odours from the dispenser.

Just sprinkle some on a damp sponge and give it a go. Your water dispenser will smell fresh and look clean in no time.

Microfibre Cloths

They are your best tool for scratch-free cleaning. That’s because they’re really absorbent, which soaks up dirt and moisture with ease.

Microfibre cloths are perfect for dusting when dry or wiping when damp. They’re a true multitasker, plus, they’re reusable, so you’re essentially helping the environment, too. 

Soft Brush

They’re perfect for the tricky spots that are usually out of reach, as they sneak into all the nooks and crannies of your water dispenser, so nothing gets left behind. 

The bristles are gentle enough to avoid causing damage, yet tough enough to get everything sparkling clean. All in all, it’s a small and handy tool that makes a big impact.

Prepare the Fridge for Deep Cleaning

Start by emptying the water so that it doesn’t spill everywhere. Look for parts like drip trays and nozzles that you can take off.

These bits often get dirty, so they need some extra love. Removing them makes cleaning easier and helps keep your fridge in good shape. Doing this lets you reach all the tricky spots and gives your dispenser a thorough deep clean.

Use A Cleaning Solution on All Dispenser Areas

Start by slightly dampening a microfiber cloth with your chosen cleaner—just don’t drench it. Pay special attention to the spout and buttons since that’s where grime loves to hide.

For the inside parts, grab an old toothbrush or a soft-bristle brush. These are perfect for reaching those pesky corners and cramped areas where grime tends to lurk. Give each spot a good scrub until everything looks spotless.

Additionally, allow the cleaning solution to sit on the surfaces for approximately five to ten minutes. This gives it time to break down stains and tackle any bacteria. 

If you stumble upon stubborn spots, add a bit more solution and gently scrub again. A little patience here goes a long way, leaving you with a sparkling clean dispenser.

Make sure to rinse thoroughly–the cleaner needs a moment to work its magic before you wash it away. Regular cleaning keeps everything fresh and ensures your water tastes just right.

How To Rinse the Dispenser

After cleaning your fridge’s water dispenser, ensure you rinse everything thoroughly with clean water. This removes any residual cleaning agents and ensures your water doesn’t have an unpleasant taste or contain any unwanted chemicals. 

Remove the drip tray and nozzles, and rinse them under gentle running water. Pay close attention to areas like the spout and inside parts to ensure there’s no cleaner left. 

Once you’re done rinsing, dry everything with a clean microfiber cloth to avoid water spots. Doing this regularly keeps your dispenser working great and your water tasting fresh.

When to Call Professional Services

Sometimes you might want to rely on qualified local services, especially if it’s been quite a while since you last cleaned the water dispenser, or for when you want to include the task as part of a larger refresh–say Spring cleaning.

If you notice mould in your dispenser, then it’s really important to have its removal delegated to a professional. Especially, if you’ve no experience in doing so yourself, as fungi are very detrimental to your health.

That’s when it’s perfectly fine to call professionals to handle it all for you. They have all the pro tools and know-how you will ever need. Make sure to call a couple of local companies first, so you get the best quote and value for your money. 

Don’t be afraid to ask questions, like whether they offer sustainable cleaning or not. A professional company wouldn’t hesitate to answer such inquiries.

Once the pros are done, you can enjoy drinking your fresh water from the dispenser without lifting a finger yourself.

Conclusion

So, this is how to clean your fridge water dispenser simply and easily. 

As you can see, it’s not that hard–you just have to remember doing it regularly. Use these tips every few months, and you’ll have no problem, and your water will always taste cool and fresh.